As we all know, as an important component, O-ring is currently widely used.
O-ring seal is a typical extruded seal. The compression rate and extension of the cross-sectional diameter of the O-ring are the main content of the seal design, which is of great significance to the sealing performance and service life. The good sealing effect of O-rings largely depends on the correct matching of O-ring size and groove size to form a reasonable compression and extension of the sealing ring.
In the case of O rings, the first thing to pay attention to is its specifications, but there is another factor that is easier to ignore, that is, the hardness of the O rings. How much hardness should be selected for the O rings? In fact, it depends on the pressure in the sealing system of the product itself.
A standard O-ring can be measured with a conical die. The inner diameter of the o-ring can be measured by placing the o-ring on the cone and falling naturally by gravity.
O-ring as a small size, simple structure, convenient disassembly of the sealing ring, has its own advantages, so in the scope of application is also relatively wide, many industries are using o-ring.
O ring in front of us to tell you a general situation of it, for the O ring it has its own advantages in sealing, for the O ring you also know what it is, you can understand from the following points.